Accessories
Installation has
never been easier
Installs in 3 easy steps
Starco’s Fast-Fuse™ Socket Kit is a UL certified pre-wired harness for TLED retrofitting. It requires less labor and provides more safety. With only three steps to complete the installation, our light fixtures will operate steadily for six years. The Fast-Fuse socket has a built-in fuse system to prevent the harm caused by the improper replacement of florescent tubes and fire risk from direct contact of LED tubes to line voltage.
1,2,3,4,5,6 and 8 Socket Kits are available. The socket kits can be customized for step control ability working with occupancy sensors. For a quick demonstration of installation and functions of this product, please see more in the video below.
Fast-Fuse 6-Lamp Socket Kit
Specs & Performance
Starco’s standard socket kits are designed for the challenges of labor cost reduction and industrial safety compliance. We offer superior quality and the highest labor efficiency solution on the market. Unshunted sockets are required to retrofit a fluorescent fixture using UL type B LED tubes. However most T8 fluorescent tubes use shunted sockets. Our Fast Fuse Socket Kit saves the labor of cutting and wiring the sockets together on site.
| Name | Socket Type | Socket Quantity | Lamp Cap | Wire Size | Wire Strand | Wire Voltage | Wire Temperature |
|---|---|---|---|---|---|---|---|
| SLT8K-1 | Unshunted | 1 | G13 | 18AWG | Solid | 600V Passes UL VW-1 Flame Test |
105°C |
| SLT8K-2 | Unshunted | 2 | G13 | 18AWG | Solid | 600V Passes UL VW-1 Flame Test |
105°C |
| SLT8K-3 | Unshunted | 3 | G13 | 18AWG | Solid | 600V Passes UL VW-1 Flame Test |
105°C |
| SLT8K-4 | Unshunted | 4 | G13 | 18AWG | Solid | 600V Passes UL VW-1 Flame Test |
105°C |
| SLT8K-6 | Unshunted | 6 | G13 | 18AWG | Solid | 600V Passes UL VW-1 Flame Test |
105°C |
| SLT8K-8 | Unshunted | 8 | G13 | 18AWG | Solid | 600V Passes UL VW-1 Flame Test |
105°C |
Downloads
Perform better, save more:
Your Retrofitting
Solution
Featured Success Story
General Motors Retrofits Orion Assembly Plant With Starco Lighting’s TLEDs
Will Save More Than $300,000 Annually in Energy and Maintenance